Oldman

Dragon Case

Category

PC in a ?

Status

Ready for Battle

Deets

Black Walnut Case made of ¾ inch stock biscuit and glued 22 by 19 by 9 ½. The front of the case has a 4 bay drive cage with a DVD, Grilled Hard drive for air, Multi function Panel, and Switch/Led. Below that you will find the air intake collar that was inserted into the face of the case housing a 130mm and 90 mm opening, the grills are made of ¼ oak, pattern transferred on the wood and cut out on a table scroll saw.

The Window side panel upper section made of plexiglass and then sprayed with Stone paint {Gray flake}, moving down to the lower half you find the Dragon cutout again of ¼ oak, design transferred onto the wood and cutout with a table scroll saw then contoured using a Dremel with a mini drum sander. All decals are sprayed with gold sparkle paint. Dragon backing of ¼ inch birch sprayed Red, both finished with clear spray. The case is sanded with 600 grit then Hand Waxed with Johnson’s Paste wax.

As you can see the inside is custom made for one video card that happens to be an EVGA 7900GTX . The back panel houses 2 120mm Low speed High volume fans running at 78cfm with a 21db rating. XP90c setting on the e6600 Processor, now with 4 gig OCZ 6400 and a Asus P5N32-E Sli Plus Motherboard, Vista OS.