wolfegod

Two Face

Category

Case Mods

Status

Final Detailing

Deets

I basically started with a Raidmax Sagitta case and pretty much gutted it out. The case came with a 80mm fan and a 120mm. I replaced the 80mm, which was on the acrylic window, with two 120mm blue LED fans. I then took the 80mm and placed it up front for intake blowing right across the hard drives.
I removed the floppy disk and hard drive cages and custom mounted the WD Raptors X’s using the cases plastic tension mounts originally on the hard drive cages.
For the cases acrylic side panel I removed the metal clips used to hold the panel on and added two chrome hinges, I did leave one metal clip for holding the door shut but slightly bent it upwards so that the panel does not need to be twisted or lifted up to close.
The other side of the case I took a 15inch flat panel monitor and attached it to the case using custom drilled holes and the bolt holes in the back of the monitor used for mounting on a wall. Then cut a piece out of the side panel just large enough for the screen to show through.
Other things
Asus M2N32 – SLI Deluxe wireless edition
AMD 5000+ BE overclocked to 3.2 GHz
XFX 8800GT overclocked 670MHz~975MHz
WD 150GB Raptor X (2)
2 gig OCZ Platinum 6400
600W Ultra XFinity PSU